Auto-Set™ Remote
Radio Frequency (RF) Capacitance Point Level Indicator


The Auto-Set remote series RF capacitance point level monitors are designed for high temperature (482°F / 250°C) or vibration applications to detect high, intermediate, or low levels of liquids, powders and free flowing granular solids stored in tanks, bins, silos or other containers.

The Auto-Set remote has a din rail mounted remote control unit with simple push-button calibration.  The remote control unit connects to the transducer, which is mounted in a suitable enclosure close to the probe.  For applications below 122 °F (50 ° C), the transducer can be mounted within the polypropylene probe housing.  For high temperature applications, the transducer will be mounted in a separate enclosure away from the probe . 


Once the Auto-Set remote is calibrated for the application it never has to be re-calibrated.  Data is stored in non-volatile memory so it is not affected by power loss.


A four digit LED display shows set values for uncovered, covered and trip settings, allowing simple set-up and adjustment.  A set of voltage-free changeover relay contacts are actuated when the level of the material in the container reaches the probe.  The unit incorporates a unique power shield which automatically compensates for material build-up around the probe and on the sides of the container, preventing false indication.


The Auto-Set remote is top or side mountable with stainless steel probes lengths up to 33 feet long, and can be used with container walls up to 3 inches thick.



  Auto-Set Remote Level Indicator  

• High and Low Level Indication


• Ideal for High temperature and Vibration Applications


• Fail-Safe and Push Button Calibration


• Digital Display and Internal Timer


• Power Shield Compensates for Material Build Up


• 3 Inch to 33 Foot Probe Lengths

  Product Questions? (309) 698-5611Phone or Email  Email    
Share |
  • Specifications
  • Downloads
  • Power Shield
  • Accessories
  • FAQ's
  • Images
  • Videos
  Auto-Set™ Remote Control Unit Technical Specifications:   Literature:  
  • Power Supply - 120/240 VAC or 24 VDC (Universal Supply)   Product Datasheet Download PDF  
  • Operating Temperature - +160 °F (71 °C) to -20 °F (-29 °C)   Full Line Product Catalog Download PDF  
  • Output - 1 Set Voltage Free Changeover Relay Contact   (See Downloads for more literature)  
  • Fail Safe - Low Level or High Level (Selectable)      
  • Calibration - Push Button (With or Without Material)   Technical:  
  • LED Display - Measured Values (Covered, Uncovered, Trip)   Product Manual Download PDF  
  • LED Indicator - Material Detection      
  • Time Delay - 0 to 60 Seconds   Product Dimensions:  
  • Probes - Stainless Steel (3 Inches to 33 Feet)   Remote & Polypropylene Probe -  
  • Protection - IP44   Download AutoCAD .dwg (AutoCAD)      Download PDF .pdf  
  Auto-Set™ Remote Probe Technical Specifications:   Remote & PEEK Probe -  
  • Maximum Temperature - 248 °F (120 °C) Polypropylene Probe   Download AutoCAD .dwg (AutoCAD)      Download PDF .pdf  
                                                  482 °F (250 °C) PEEK Probe      
  • Mounting Thread - 1-1/4 Inch NPT   Compare Level Indicators Compare Level Indicators  
  • Power Shield - 3-7/8 Inch (Polypropylene and PEEK Probes)      
  • Protection - IP65, NEMA 4      
  • ATEX & CE Versions Available      
  ATEX - Europe CE - Europe       
  Part Numbers and Accessories:      
  • ATSREM2V0 ~ Auto-Set Remote Control Unit      
  • ATSTRAN1 ~ Auto-Set Remote Transducer      
  • ATSREMB ~ Transducer Enclosure      
  • AREM120 ~ Polypropylene Probe (248 °F / 120 °C)      
  • AREM250 ~ PEEK Probe (482 °F / 250 °C)      
  • EX03 ~ 316 Stainless Steel 3-3/8 Inch Probe      
  • EX12 ~ 316 Stainless Steel 8 Inch Probe      
  • EX24 ~ 316 Stainless Steel 20 Inch Probe      
  • EX36 ~ 316 Stainless Steel 32 Inch Probe      
  • EX48 ~ 316 Stainless Steel 44 Inch Probe (M/F Threaded Ends)      
  • WP ~ 304 Stainless Steel Probe Wire      
  • SMP ~ Mounting Plate (Stainless Available)      
  Literature:   Product Dimensions:  
  Product Datasheet Download PDF   Remote & Polypropylene Probe -  
  Full Line Product Catalog Download PDF   Download AutoCAD .dwg (AutoCAD)      Download PDF .pdf  
  Technical:   Remote & PEEK Probe -  
  Product Manual Download PDF   Download AutoCAD .dwg (AutoCAD)      Download PDF .pdf  
  Automatic Level Control Wiring Download PDF      
  Note: Product manuals for older part numbers can be      
  found under the Technical Support area.      
  The power shield creates a barrier and enables the unit to ignore material built up on the probe, preventing false readings.  The Auto-Set remote probes have 3-7/8 inch power shields, and can be used with walls up to 3 inches thick.  
Auto-Set Remote Power Shield
Auto-Set Probes

Stainless Steel Probes/Wire

The Auto-Set™ is available with 3-3/8, 8, 20, 32 and 44 inch 316 solid stainless steel probes.  For applications up to 33 feet long (maximum), 304 stainless steel wire is used to extend the probe length.

Auto-Set Mounting Plate

Mounting Plates (Top & Side)

The SMP (side mounting plate) and TMP (top mounting plate) are zinc plated steel mounts with a 1-1/4 inch NPT coupling.   Stainless steel versions are also available.

  Auto-Set Transducer Enclosure  

Transducer Enclosure

The ATSREMB enclosure is used to mount the Auto-Set™ transducer electronics away from heat sources above 122 °F (50 °C).

  Can the Auto-Set™ remote probes be side or top mounted?  
  Yes, they can be top or sided mounted.  
Auto-Set Remote Control Unit
Auto-Set Polypropylene Probe
Auto-Set PEEK Probe
  No videos currently available for this product.