X400 Elite Alarmswitch Centralized Alarm Monitoring System
The X400 Elite is a microprocessor controlled low cost alarm indicator panel for use with level indicators, hazard controls and limit switch sensors. The X400 accepts signals from different sources in up to 8 zones, and is able to cause alarm and shutdown of the machine when an alarm condition has been detected.
Alarm and status LEDs on the lid of the X400 provide quick location of alarm conditions. Alarm muting can be performed at the panel or by an optional remote push button to silence external alarms. If the system is muted, it will automatically reactivate when a new alarm is triggered. Testing can also be activated at the panel, providing full system verification.
To See Illustrated Sensor Placement Diagrams For Specific Equipment, CLICK HERE
Belt Misalignment Sensor
The Touchswitch™ is an electromechanical limit-switch with no
moving parts, which detects tracking and misalignment
problems on bucket elevators and conveyors. Unlike a rub block that utilizes friction (heat) to activate, the Touchswitch is pressure sensitive for safer and more reliable monitoring.
The M300 Slipswitch is a simple inductive shaft speed monitoring device. The self-contained unit has a single set point, which signals when the shaft speed has dropped by 20% of normal running speed. It is used for detecting dangerous slow downs and underspeed on conveyors, bucket elevators, airlocks, mixers, fans, grinders and many other machines.
The Binswitch detects level or plug situations for bulk granular solids or liquids in tanks, bins, or silos and can be used as a plug or choke detector in chutes, conveyors and elevator legs.
The Roto-Level series are electromechanical rotary level indicators for point level indication of bulk granular solids in bins, tanks, silos. Available with vertical extensions up to 14 feet.
The Auto-Set™ series are RF capacitance point level indicators with push button calibration and material build-up compensation for high, intermediate or low level detection of liquid, powders or free-flowing granular solids. Once the unit is calibrated for a specific application, it never has to be re-calibrated. Available with vertical extensions up to 33 feet.
or Email 
4B USA - North & South America
© 2024 4B Group - All Rights Reserved Terms of Use & Legal Notices Back to Top