HOME >> PRODUCTS >> ELEVATOR BUCKETS >> BUDD AA CAST NYLON ELEVATOR BUCKET

BUDD AA
Industrial Elevator Bucket
         
 

Industrial strength long wearing cast nylon elevator bucket with reinforced front lip and built-in lubricant. Designed to handle light to medium abrasive granules and powders, also ideal for sticky products.

  
         
 

Material:

 

BUDD AA Elevator Bucket

Literature:

• Product Datasheet Download PDF

• Full Line Product Catalog
        (Requires Flash Player)

Share |

 
  Cast Nylon    
       
 

Temperature Range:

    
  -60° F to 300° F    
       
 

Features:

    
  • Reinforced Front Lip    
  • Natural, Built-In Lubricant for Clean Discharge    
  • Non-Sparking and Non-Corrosive    
  • Extra Thick Walls    
       
 

Applications:

    
  Light to Medium Abrasive Industrial Products: Sand,    
  Aggregate, Cement, Coal, Wood Chips and Fertilizer    
       
  Product Questions? (309) 698-5611Phone or Email  Email    
       
 
  • Specifications
  • Downloads
  • Accessories
  • FAQ's
  • Images
  • Videos
  • Elevator Design Service
  Basic BUDD AA Specifications:   • Material Selection Guide  
    - For More Specifications, See Product Datasheet (PDF)   • How To Measure A Bucket  
         
 
Nominal
Size (in.)		 Length
(in.)		 Projection
(in.)		 Back Depth
(in.)		 Capacity (cu.in.)
Water Level		 Capacity (cu.in.)
Gross
9 x 3 9-1/2 3-5/16 3-7/16 15.6 41.5
6 x 4 6-1/2 4 4-5/16 31.1 48.4
8 x 5 8-7/16 5 5-1/2 63.9 98.5
15 x 5 15-3/4 5-7/16 5-11/16 140.0 209.1
19 x 5 19-7/8 5-1/4 5-1/8 146.9 228.1
10 x 6 10-5/8 6 6-1/4 114.1 176.3
12 x 7 12-7/16 7-1/2 7-5/16 195.3 300.7
14 x 7 14-3/4 7-9/16 7-7/16 241.9 373.3
14 x 8 14-1/2 8 8-1/2 279.9 442.4
16 x 8 16-5/8 8 8-9/16 328.3 501.1
18 x 8 17-3/4 8 8-1/2 362.9 534.0
24 x 8 24 8 8-11/16 445.8 623.8
18 x 10 18-7/8 10-3/16 10-9/16 539.1 839.8
24 x 13 24 12-1/4 12-3/4 946.9 1,728.0
 
         
  Literature:   White Papers:  
  • Product Datasheet Download PDF   • Achieving Maximum Capacity on a New or Existing Bucket Elevator  
  • Full Line Product Catalog      
         (Requires Flash Player)      
         
  Technical Links:      
  • Bucket Elevator Design Service      
  • Bucket Material Selection Guide      
  • How To Measure A Bucket      
         
         
 
Elevator Bolts
  

Elevator Bolts

4B is the world's leading elevator bolt manufacturer, producing all the well known industry types: Norway, Euro, Fang, Easifit, Ref70 and Easifit.

More Info

 

  
     
     
     
     
     
     
         
 
 
         
 
Elevator Belting
  

Elevator Belting

Rubber, PVC and FDA food quality belts are available. Belts vary by style and include: anti-static, high temperature, oil resistant, and flame retardant types.

More Info

 
     
     
     
     
     
     
         
 
 
         
 
Elevator Splices and Fasteners
  

Elevator Belt Splices & Fasteners

A range of mechanical splices and fasteners for use on most PVC, rubber and steel web elevator belts.

More Info

 
     
     
     
     
     
     
         
  How long of an elevator bolt do I need?  
  When installing buckets on an elevator belt, use this simple formula:  
  (belt thickness + bucket back thickness + washer thickness + nut thickness + 1/4 inch)  
     
  What is a "digger" bucket?  
  Some materials can form a hardened crust along the side wall of the elevator boot, and powders sitting over time  
  can become rock hard. Both of these issues can cause premature elevator bucket wear. Digger buckets are  
  designed to have slightly more width and projection than standard buckets, thereby "digging" through or breaking  
  apart the hardened material, helping to prevent added wear to the standard buckets. Digger buckets are  
  traditionally made from steel, however nylon buckets may also be used depending on the application.  
     
  How many digger buckets do I need?  
  For most applications, use one digger bucket for every nine standard buckets.  
     
  Can I use buckets on an overlap splice?  
  An overlap splice doubles the thickness of the belt, so a bucket's projection will increase on the overlap.  
  Usually this will not cause a problem, but if it does, you can use buckets with one inch less projection or cut  
  the tip of each bucket by half an inch on the spliced area.  
     
  When using an overlap splice, how much extra belt should I use for the splice?  
  The length of the splice should be three times the width of the belt.  
     
  How often should I replace head pulley lagging?  
  Lagging should be replaced every time the elevator belt is replaced.  
     
 
BUDD AA Elevator Bucket
BUDD AA Elevator Bucket
      
       
       
       
       
       
           
           
           
           
           
  No videos currently available for this product.    
       
       
       
       
       
       
       
       
       
       
  Take advantage of 4B's FREE, worldwide technical support service from a team of engineers specializing in the design of bucket elevators.

Using your key technical data, 4B can either design your new bucket elevator or we can help you to increase the capacity of your existing bucket elevator. Our engineers can give you a detailed technical recommendation for the ideal bucket elevator with the ideal capacity and discharge characteristics.

To get a free recommendation from our engineers, CLICK HERE to fill out our online form.